A robot welds your part before the cell exists
Place the robot, table, fixture and part in 3D. Reach, torch orientation and collisions are checked for every pose, so you know the risk before you buy.
Designing a robotic cell
The part and the seams come from the same model that is in the order.
The cell layout
The FR20 robot, a table, a fixture and a part on one scene, with joint sliders to check positions by hand and automatic placement.
Seams from a welded assembly
The assembly’s seams go into the cell, and the system proposes setups and shows which seams are within reach.
A welding simulation
See below: the robot welds four seams. You can rotate the cell, follow the torch and change the speed.
The whole plant in one system
From a customer request to a traceable finished unit — see every area on real screens.
Sales & 3D configurator
Request, 3D model, price and offer in one view.
Engineering: CAD, drawings and BOM
CAD, drawings, STEP import and an automatic BOM.
Costing
Cost from material and routing, quantity breaks, make or buy.
Orders & production planning
Orders, a 3D product map, a Kanban board and work dispatch.
Shop floor: operators, tasks and results
Operator terminal, shop-floor tasks, bending and team results.
The plant & the production map
Halls, machines, people and a live production map.
Quality & traceability
Inspections, defects, non-conformities, rework and scrap.
How we roll Oprela out in a plant
A pilot on one line, then scaling across the plant.
Fragen von Herstellern
Is the simulation proof of reach?+
Which robot is shown?+
Digitalisieren Sie Ihre Fertigung noch diese Woche
Ihre kostenlose 14-tägige Testversion umfasst Engineering-Stückliste, Fertigungsaufträge und Qualitätskontrolle.